| INSTRUCTIONAL EQUIPMENT |
LOCATION |
TIPS
FOR USE |
FOR
MAINTENANCE AND ASSISTANCE CALL: |
| Pentium Computer |
Under the front podium in a locked cabinet |
The computer is to be left "on" 24
hours. The monitor, mouse and keyboard are left on the podium. Turn the monitor on, and
login with your CVM username and password. Files can be transferred via Network
Neighborhood by choosing Bu145, shared file. Create a file folder with your name on it,
and put your files in this folder. Delete files when finished. You can also use zip disk,
syquest disk, or 3.5" disk. The key to the computer cabinet is checked out at BCU -
(123 Bustad). When you are finished using the computer, go to "start", then
"shut down", then choose "login other user". Do NOT turn computer off
. |
CVM-VIS 5-0101 or BCU (123 Bustad)
5-2624 |
| CRT Video/Data Projector |
Third row up, left middle section in
classroom. |
The projector is turned "on" at the
podium. Use the remote control attached to the right of the control panel on the podium,
pressing the "on" button. The projector should automatically select the type of
image being sent…if it does not, hit the "1" button for video, the
"2" button for computer. DO NOT TURN "ON/OFF" AT THE PROJECTOR. ALWAYS
USE THE REMOTE. Use switch on podium control panel to raise/lower projection screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
Video Cassette Player
1/2" VHS |
In cabinet under the CRT Video Projector;
third row up, left middle section in classroom. |
The key to the cabinet is checked out at BCU -
(123 Bustad). Keep doors open so remote control will work. Turn the VCR "on" w/
remote control (found on top of the VCR or on the podium - Panasonic ISS #VT 63). Power
button is upper left corner on remote. Use other controls on remote to operate the VCR.
Turn "Audio On/Off" switch "on" at podium control panel. Adjust volume
with "Video/Computer Volume" knob on control panel. Use switch on podium control
panel to raise/lower projection screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| 2 Kodak Slide Projectors |
Projection room. Key to the projection room is
checked out at BCU - (123 Bustad). |
Power is controlled at the front podium. Two
buttons marked "Slide Projector Power". Turn the power "on", then turn
the projector "on" at the projector. Install slide tray. Use the wireless remote
for projectors, which is velcroed to podium top. If bulb burns out, extra bulbs are on
shelf under first projector. Use switch on podium control panel to raise/lower projection
screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Overhead Projectors (2) |
Right side of podium |
Turn "on" using switch in front of
projector. If bulb burns out, a second bulb can be accessed by moving the lever to
"bulb 2". It is best to use the overhead on the slanted wall above the
blackboards with the screen "up". Use switch on podium control panel to
raise/lower screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| 16mm projector |
Projection room. Key to the projection room is
checked out at BCU - (123 Bustad). |
Turn projector "on" using switch on
projector. Thread film as per instructions on projector. Projector cannot be controlled at
podium. Turn "Audio On/Off" switch "on" at podium control panel.
Adjust volume with "Video/Computer Volume" knob on control panel. Use switch on
podium control panel to raise/lower projection screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Cassette Tape Player/Recorder |
Second drawer down on right front of podium. |
Turn "Audio On/Off" switch
"on" at podium control panel. Turn tape player on. Insert tape. Press play.
Adjust volume with "Video/Computer Volume" knob on control panel. If you wish to
"record" a lecture, press red Record button and Play button at same time. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Light Pointer |
On counter at podium - may be in black case -
EDNALITE |
Make sure plugged in. A white arrow shows on
screen when you push button on the unit. Focus arrow by turning lens on end of tube. Laser
pointers are available for checkout at BCU (123 Bustad). |
BCU - 123 Bustad 5-2624 |
| Microphone/PA system |
A small microphone is velcroed to the top of
the podium. |
Turn "Audio On/Off" switch
"on" at podium control panel. Adjust volume with "Microphone Volume"
knob on control panel. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
Return to Top
WEGNER G50 - University Lecture Hall
Capacity: 130
| INSTRUCTIONAL EQUIPMENT |
LOCATION |
TIPS FOR USE |
FOR MAINTENANCE AND
ASSISTANCE CALL: |
| Pentium Computer |
Under the front podium in a locked cabinet |
The computer is to be left "on" 24
hours. The monitor, mouse and keyboard are left on the podium. Turn the monitor on, and
login with your CVM username and password. Files can be transferred via Network
Neighborhood by choosing ???? (to be assigned number soon!) shared file. Create a
file folder with your name on it, and put your files in this folder. Delete files when
finished. You can also use zip disk, or 3.5" disk. The key to the computer
cabinet is available through the classroom assistant or checked out at VCAPP office
(Wegner 205). When you are finished using the computer, go to "start", then
"shut down", then choose "login other user". Do NOT turn computer off
. |
Immediate Assistance: CVM VIS: 5-0101 or BCU
(123 Bustad)5-2624 |
| Video/Data Projector |
Hanging from cieling |
The projector is turned "on" at the
cabinet on the west side of the room. Key is available from classroom assistant. Use the
remote control in the cabinet pressing the "on" button. The projector should
automatically select the type of image being sent…if it does not. Use switch on
podium control panel to raise/lower projection screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
Video Cassette Player
1/2" VHS |
In cabinet on West Wall. |
The key to the cabinet is checked out from
VCAPP office (Wegner 205). Instructions are on the inside door of the cabinet. Keep door
open so remote control will work. Turn "Audio On/Off" switch "on" at
podium control panel. Adjust volume with "Video/Computer Volume" knob on control
panel. Use switch on podium control panel to raise/lower projection screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Overhead Projectors (2) |
West side of room. |
Turn "on" using switch in front of
projector. If bulb burns out, a second bulb can be accessed by moving the lever to
"bulb 2". Use switch on podium control panel to raise/lower screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| 2 Kodak Slide Projectors |
Projection room. Classroom assistant has key
to the projection room or VCAPP office (Wegner 205). |
Power is controlled at the front podium. Two
buttons marked "Slide Projector Power". Turn the power "on", then turn
the projector "on" at the projector. Install slide tray. Use wireless remote for
projector, which is velcroed to podium top. If bulb burns out, extra bulbs are on shelf
under first projector. Use switch on podium control panel to raise/lower projection
screen. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Microphone/PA system |
A hand-held microphone is in the top right
drawer at the podium. |
Plug the end of the microphone cord into the
receptacle on the control panel marked "Microphone". Turn "Audio
On/Off" switch "on" at podium control panel. Adjust volume with
"Microphone Volume" knob on control panel. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Cassette Tape Player/Recorder |
Second drawer down on right front
of podium. |
Turn "Audio On/Off"
switch "on" at podium control panel. Turn tape player on. Insert tape. Press
play. Adjust volume with "Video/Computer Volume" knob on control panel. If you
wish to "record" a lecture, press red Record button and Play button at same
time. |
Instructional Support Services
(ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
Return to Top
McCOY 203 - University Lecture Hall
Capacity: 91
| INSTRUCTIONAL EQUIPMENT |
LOCATION |
TIPS FOR USE |
FOR MAINTENANCE AND
ASSISTANCE CALL: |
| Computer |
A checkout laptop computer is available: at
VET/ PHAR Library or BCU. |
Connect computer cable to input on panel
inside cabinet near hallway door. The key to the cabinet is checked out from Paul Johnson
in the Anatomy Lab (McCoy 205)or BCU (123 Bustad). Instructions are on the inside door of
the cabinet. |
Assistance: BCU (123 Bustad)
5-2624 |
| Video/Data Monitors |
Hanging from ceiling. Control panel in cabinet
in NorthEast corner of room. |
The classroom assistant has the key to the
cabinet or it can be checked out from Paul Johnson in the Anatomy Lab (McCoy 205)or BCU
(123 Bustad). Instructions are on the inside door of the cabinet. (Please turn system off
when finished.) |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Multimedia
Projector |
A multimedia projector is available: at VET/
PHAR Library or BCU. |
Connect the video cable in the projector case
to Video 1 in on the projector, and Monitor out on the Computer. Power up computer by
pushing on/off switch on back right side (holding for three seconds). Power up Multimedia
projector by turning power switch (above power cord) "on" and holding
"orange" button on top of projector down for 3 seconds until it turns green.
(More detailed setup handouts are available at BCU). |
Assistance: BCU (123 Bustad)
5-2624 |
Video Cassette Player
1/2" VHS |
In cabinet in NorthEast corner of room (just
left of hallway door). |
The key to the cabinet is checked out from
VCAPP office (Wegner 205). Instructions are on the inside door of the cabinet. Keep door
open so remote control will work. Turn "Audio On/Off" switch "on"
control panel in cabinet. Adjust volume with "Volume" knob on amplifier.
Manually raise/lower screens. (Instructions are on inside panel of cabinet.) |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Overhead Projector |
Near podium on window side of room. |
Turn "on" using switch in front of
projector. If bulb burns out, a second bulb can be accessed by moving the lever to
"bulb 2". Manually raise/lower screens. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| 2 Kodak Slide Projectors |
On projector station in back of room. |
Power for projectors is controlled at the
projector. Use remote for projector, which is velcroed to podium top. If bulb burns out,
extra bulbs are in drawer under projectors. Two projection screens are in the room. One
larger, and one smaller which allows for dual projection. Projection screens are manually
raised and lowered. |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
| Microphone/PA system |
A hand-held microphone is in the cabinet (or
may be in a drawer in the podium). |
Plug the end of the microphone cord into the
receptacle on the control panel in the cabinet. Turn "Audio On/Off" switch
"on". Adjust volume with "Microphone Volume" knob on amplifier in
cabinet. (Directions on inside of cabinet door) |
Instructional Support Services (ISS) - 5-4535
Immediate Assistance: BCU (123 Bustad)
5-2624 |
Return to Top
Bustad
210 - Veterinary Medicine Lab
Capacity: 40 (variable dependent on room arrgt)
| INSTRUCTIONAL EQUIPMENT |
LOCATION |
TIPS FOR USE |
FOR
MAINTENANCE AND ASSISTANCE CALL: |
| Computer/
Multimedia Projector |
A laptop computer and multimedia projector is
available: at VET/ PHAR Library or BCU. |
Connect the video cable in the projector case
to Video 1 in on the projector, and Monitor out on the Computer. Power up computer by
pushing on/off switch on back right side (holding for three seconds). Power up Multimedia
projector by turning power switch (above power cord) "on" and holding
"orange" button on top of projector down for 3 seconds until it turns green.
(More detailed setup handouts are available at BCU). |
Assistance: BCU (123 Bustad)
5-2624 |
| Video Monitors |
Hanging from ceiling. Control panel in cabinet
in North-East (back) corner of room. |
Turn 2 red switches at top of cabinet
"on". Flip switches on three units "on". Push button marked
"VTR" in (it should light up). (Instructions are on the inside door of the
cabinet.) NOTE: If video doesn’t work check to make sure the "button"
pushed corresponds with the plug-in at the podium. (Please turn system off when finished.) |
Assistance: BCU (123 Bustad)
5-2624 |
Video Cassette Player
1/2" VHS |
Inside cart with Overhead on it. |
Wheel the cart over to the podium and connect
power to power outlet at podium. Connect Video plug from back of cart (plug with
rectangular adaptor…several sets of pins coming out) into the plug marked VTR on the
class side of the podium. The pin configuration fits one way only! DO NOT FORCE.
For audio: There is a small panel which pulls out on the blackboard side of the podium.
Push the Audio "on". Use lower knob to control volume. |
Assistance: BCU (123 Bustad)
5-2624 |
| Kodak Slide Projector |
On cart in center of room. |
Power is controlled at the cart. Plug power
cord into power outlet on bottomside of each table. Use remote for projector, which is
strung from cart to front of room. If bulb burns out, extra bulbs are on cart shelf under
projector. Use wall switch to left of screen to raise/lower projection screen. |
Assistance: BCU (123 Bustad)
5-2624 |
| Overhead Projectors |
On cart in room. |
Turn "on" using switch in front of
projector. If bulb burns out, a second bulb can be accessed by moving the lever to
"bulb 2". Use wall switch to left of screen to raise/lower projection screen. |
Assistance: BCU (123 Bustad)
5-2624
|
| Microphone/PA system |
A hand-held microphone is in the top right
drawer at the podium. A remote microphone can be checked out from BCU. |
Plug the end of the microphone cord into the
receptacle on the podium marked "Microphone". Open control panel on blackboard
side of podium. Turn "Audio On/Off" switch "on" at podium control
panel. Adjust volume with "Microphone Volume" knob on control panel. |
Assistance: BCU (123 Bustad)
5-2624 |
| Olympus Microscope/ TV monitor |
Located on low cart in front of room. |
Plug video cord (wrapped on holder in back of
cart) into Cam-Micro input on podium (classroom side). Turn video monitors on (see above)
but push CAM/MICRO button instead of VTR button. Turn power switch "on" (under
cart in front center). Pull monitor power button. Place filter over microscope light. |
Assistance: BCU (123 Bustad)
5-2624 |
Return to Top
Bustad 224 - Veterinary Medicine Lab
Capacity: 50
| INSTRUCTIONAL EQUIPMENT |
LOCATION |
TIPS FOR USE |
FOR
MAINTENANCE AND ASSISTANCE CALL: |
| Computer/
Multimedia Projector |
A laptop computer and multimedia projector is
available: at VET/ PHAR Library or BCU. |
Connect the video cable in the projector case
to Video 1 in on the projector, and Monitor out on the Computer. Power up computer by
pushing on/off switch on back right side (holding for three seconds). Power up Multimedia
projector by turning power switch (above power cord) "on" and holding
"orange" button on top of projector down for 3 seconds until it turns green.
(More detailed setup handouts are available at BCU). |
Assistance: BCU (123 Bustad)
5-2624 |
| Kodak Slide Projector |
On cart in center of room. |
Power is controlled at the cart. Plug power
cord into power outlet on top of each table. Use remote for projector, which is strung
from cart to front of room. If bulb burns out, extra bulbs are on cart shelf under
projector. Use wall switch to left of blackboard to raise/lower projection screen. |
Assistance: BCU (123 Bustad)
5-2624 |
| Overhead Projectors |
On cart in room. |
Turn "on" using switch in front of
projector. If bulb burns out, a second bulb can be accessed by moving the lever to
"bulb 2". Use wall switch to left of blackboard to raise/lower projection
screen. |
Assistance: BCU (123 Bustad)
5-2624
|
| Microphone/PA system |
A hand-held microphone can be checked out at
BCU. |
Plug the end of the microphone cord into the
receptacle on the podium marked "Microphone". Open control panel on blackboard
side of podium. Turn "Audio On/Off" switch "on" at podium control
panel. Adjust volume with "Microphone Volume" knob on control panel. |
Assistance: BCU (123 Bustad)
5-2624 |
Return to Top
VTH 1408/1410 - Clinical Sciences Lecture Room
Capacity: 50
| INSTRUCTIONAL EQUIPMENT |
LOCATION |
TIPS FOR USE |
FOR
MAINTENANCE AND ASSISTANCE CALL: |
| Computer/ Multimedia Projector |
A desktop Pentium computer and multimedia
projector are permanently installed in the front of the room.. |
Power up Multimedia projector by turning power
switch (above power cord) "on" and holding "orange" button on top of
projector down for 3 seconds until it turns green. Please turn the projector off when
finished by holding the same button down until it turns orange. Let the project fan run
until it shuts off (cooling the lamp - about 45 seconds) before turning the power switch
off. The computer can be accessed from your office machine by through Network
Neighborhood, VTH 120. Open the "shared" directory. Make a folder with your name
on it, and place your file in it. Please delete your file when finished. |
Assistance: BCU (123 Bustad)
5-2624 |
| Kodak Slide Projector (2) |
On carts in center of room. |
Power is controlled at the cart. Plug power
cord into power outlet in the floor. Use remote for projector, which is strung from cart
to front of room. If bulb burns out, extra bulbs are on cart shelf under projector.
Projection screens are manually raised and lowered. Please be careful not to fully extend
the screen. A short "jerk" on the screen will release it to rewind. |
Assistance: BCU (123 Bustad)
5-2624 |
| Overhead Projectors |
On cart in room. |
Turn "on" using switch in front of
projector. If bulb burns out, a second bulb can be accessed by moving the lever to
"bulb 2". Use wall switch to left of blackboard to raise/lower projection
screen. |
Assistance: BCU (123 Bustad)
5-2624
|
Return to Top |